Silanes & Silicones for Plastics

  Polymer Manufacturing (Silane Donors for Polypropylene Catalysts)
  Engineering Plastic (Siloxane Masterbatch & Powder)
  High Performance Plastic / Filled Plastic (Thermosets)
  Silane Crosslinking PE (XLPE)
  Adhesion Promotion in HFFR Cables

Adhesion Promotion in HFFR (Halogen-Free Flame Retardant) Cables
SiSiB silanes can be used as adhesion promoter (coupling agent) in HFFR material or filled rubber, to improve the mechanical and electrical properties of cables. In the presence of moisture the alkoxy groups OR of the silane bind to the filler surface, releasing alcohol as a by-product. The organofunction group Y binds to the polymer.

For more information on filler pretreatment, please visit our guide for filler treatment.

  SiSiB Amino or Vinyl Silane Coupling Agents can
  Enable the high loading levels of ATH or MDH requrired for effective flame retartation
  Improve the processability of highly filled polymers
  Enhance the mechanical properties of the finished product

The choice of SiSiB silanes functionality for HFFR applications depends on the polymer. For the thermoplastic HFFR either amino or vinyl functional silanes may be used as adhesion promoter (coupling agent). When using vinyl silanes a small amout of additional peroxide is required to obtain adhesion. For elastomeric HFFR compounds based EVA or EVA-polyolefin blends the choice of SiSiB silanes adhesion promoter depends on the vinyl acetate (VA) content of the polymer. Amino silanes are typical used when the VA content is higher than 20%, vinylsilanes are an alternative when the VA conter is lower than 20%.

Recommended Adhesion Promoters for HFFR Cables

PRODUCT CHEMICAL NAME CAS NO.
SiSiB® PC1100 3-AMINOPROPYLTRIETHOXYSILANE 919-30-2
  Improve mechanical properties.
SiSiB® PC1108 BIS[(3-TRIETHOXYSILYL)PROPYL]AMINE 13497-18-2
Improve wet electrical properties.
SiSiB® PC1951 N-(N-BUTYL)-3-AMINOPROPYLTRIMETHOXYSILANE 31024-56-3
Improve wet electrical properties.
SiSiB® PC3100 3-GLYCIDOXYPROPYLTRIMETHOXYSILANE 2530-83-8
  For higher VA content, peroxide not required.
SiSiB® PC6110 VINYLTRIMETHOXYSILANE 2678-02-7
  Fast reacting, requires peroxide.
SiSiB® PC6120 VINYLTRIETHOXYSILANE 78-08-0
  Ethanol by-product, requires peroxide.
** Vinyl silane oligomer can be used with high efficiency, low volatility, reduce VOC emissions, it requires peroxide.

Recommended Adhesion Promoters for Flexible Cables

PRODUCT CHEMICAL NAME CAS NO.
SiSiB® PC6120 VINYLTRIETHOXYSILANE 78-08-0
  Ethanol by-product, requires peroxide.
SiSiB® PC6130 VINYLTRIS(2-METHOXYETHOXY)SILANE 1067-53-4
  High flash point.
** Vinyl silane oligomer can be used with high efficiency, low volatility, reduce VOC emissions, it requires peroxide.